Products catalog

  • Rogowski panel power and power quality analyzer | 3.5" IPS display | Waveform | MODBUS TCP/IP | RS485 | ME831

    Code: ESME831

    A multifunctional panel-mounted power and electrical quality analyzer designed for detailed real-time analysis of electrical networks. The device supports Rogowski coils, 333 mV CT transformers, and current clamps, allowing safe measurement of very high currents up to 6000 A without interrupting electrical circuits. The large 3.5-inch IPS color display with waveform visualization, harmonic analysis up to the 50th harmonic, event logging, and data storage on a memory card makes the device a full-featured power quality analyzer suitable for both diagnostics and long-term monitoring. 

  • Technical Specifications

    Type: Panel-mounted power and power quality analyzer
    Model: ME831
    Display: 3.5" IPS color display
    Power supply: 85–305 V AC / 100–430 V DC
    Communication: Ethernet MODBUS TCP/IP; MODBUS RS485
    Harmonic analysis: 1–50 harmonics
    Data storage: 32 GB TF (microSD) card; Data download via USB flash drive
    Mounting: Panel-mounted (cabinet installation)

    Current and Voltage Sensor Support

    Rogowski coils (recommended):
    100 A – MRC-16; 300 A – MRC-24; 600 A – VRC-36;
    1000 A – NRC-XL-100; 3000 A – NRC-XL-150; 6000 A – NRC-XL-200

    Current clamps:
    ST08 – 10 A / 100 mA / 10 A; ST08 – 10 A / 320 mV

    Voltage measurement: Direct or via VT – up to 500 kV

    Measured Parameters

    Voltage and current
    Active, reactive, and apparent power
    Electrical energy
    Power factor (cos φ)
    Frequency
    Max./Min. values
    Harmonics (1–50)
    Phase imbalance
    Phase angle
    Voltage swells and sags
    Real-time waveform display

    Event and Data Logging

    Event type
    Start time
    Duration
    Amplitude value
    Voltage RMS 1/2 values
    Voltage waveform

    Functions

    Professional power quality analysis
    Waveform visualization
    Harmonic analysis up to the 50th harmonic
    Event logging (sag, swell, disturbances)
    Data logging and export
    MODBUS TCP/IP and RS485 integration
    Operation with Rogowski coils without power interruption

    Applications

    Engineer / Energy specialist: Enables detailed analysis of power quality, harmonics, imbalance, and loads; suitable for energy audits, industrial projects, and fault diagnostics.

    Electrician / System integrator: Panel mounting, Modbus TCP / RS485 communication, and wide sensor compatibility allow easy integration into BMS, SCADA, or PLC systems.

    Building manager / Advanced user: Ideal for commercial buildings, industrial facilities, and solar power plants where monitoring both energy consumption and power quality is essential.

    Pros

    Large IPS display with waveform visualization
    Advanced power quality and event analysis
    Data logging and export
    MODBUS TCP/IP + RS485
    Wide sensor range up to 6000 A
    Suitable for professional audits

    Cons

    Rogowski coils and current clamps not included
    Designed for professional use
    Correct sensor selection required 

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    TDS (dissolved solids) sensor | 0…1000 ppm | 0…2.3 V | 5 V DC | analog input | for D105 pulse analyzer | smart-MAIC | TDS Level
    Code: TDS Level

    TDS sensor for measuring dissolved salt concentration and assessing water hardness. It connects to the analog input of the smart-MAIC D105 and is powered from its 5 V terminal. It helps you see in time when filter cartridges need replacing.

    Price 52.27 € VAT incl.
    ( 43.20 € VAT excl. )
    Wind direction sensor | 0–360°, 16 directions of 22.5° | 12–24 V DC | RS485 Modbus RTU | for D105 pulse analyzer | smart-MAIC | T5W
    Code: T5W

    The T5W wind vane sensor detects wind direction in 16 sectors of 22.5° (value 0–15, 0 = north). It connects to the RS485 input of the smart-MAIC D105 via Modbus RTU. 12–24 V DC supply is not included.

    Price 174.05 € VAT incl.
    ( 143.84 € VAT excl. )
    pH level sensor | pH 0…14 | 5 V DC | 80 cm cable | analog input | for D105 pulse analyzer | smart-MAIC | pH Level
    Code: pH Level

    Submersible pH sensor for measuring water acidity in pools, aquariums and water treatment systems. It connects to the analog input of the smart-MAIC D105 and is powered from its 5 V terminal. Range pH 0…14, accuracy 0.2 pH.

    Price 57.89 € VAT incl.
    ( 47.84 € VAT excl. )
    Water flow sensor | up to 30 l/min | ~450 pulses/l | G1/2" (DN15) | 5 V DC | pulse input | for D105 pulse analyzer | smart-MAIC | DN15(G1/2")
    Code: DN15(G1/2")

    A turbine water flow sensor with G1/2" (DN15) connections for flows up to 30 l/min. It connects to a pulse input of the smart-MAIC D105 and gives about 450 pulses per litre. No separate supply is needed – the D105 provides 5 V.

    Price 38.53 € VAT incl.
    ( 31.84 € VAT excl. )
    CYKY-L 5G10 | 5×10 mm² | Copper power cable | 450/750 V | black | 1 m | Lietkabelis
    Code: 91951013

    CYKY-L 5G10 (5×10 mm²) – 450/750 V copper power cable for three-phase 400 V circuits with neutral. Solid cores, PVC insulation and sheath, suitable indoors, outdoors and in the ground. AB Lietkabelis, price per 1 m.

    Price 8.67 € VAT incl.
    ( 7.17 € VAT excl. )
  • privacy policy

    Information