Products catalog

  • Smart 3-phase electrical network analyzer with WiFi | Tuya | 16 channels | up to 200A | for solar power systems and homes

    Code: ES-PC341-W-TY

    Smart 3-phase electrical network analyzer with WiFi, designed for real-time energy monitoring. The device allows measuring not only total consumption but also the energy usage of individual circuits or devices by using up to 16 additional CTs (current transformers). Perfectly suitable for solar power systems (PV), homes, industry, and IoT systems where precise energy management, analysis, and optimization are important. 

  • Technical Specifications

    Product type: smart energy monitor (Power Monitor Clamp)
    Phases: 3-phase (three-phase)
    Maximum current: up to 200 A
    Nominal current: 50 A
    Measurement accuracy: ±(0.5% + 2) / calibrated ±2%
    Energy measurement range: 0 – 9999.9 kWh
    Operating voltage: 90 – 380V AC
    Frequency: 50/60 Hz
    WiFi: 802.11 b/g/n (2.4 GHz)
    BLE: used for WiFi pairing
    Reporting interval: every 15 s
    Operating temperature: -20°C … +55°C
    CT connections:
    Main CT: 3.5 mm connector (1 m cable)
    Additional CT: 2.5 mm connectors (up to 16 channels)
    Dimensions (main module): 86 × 86 × 37 mm
    Certificates: CE, RoHS, FCC
    Application: homes, industry, energy sector, telecommunications, IoT

    Functions

    Real-time 3-phase energy monitoring – measures voltage, current of each phase and total energy consumption
    Up to 16 circuits monitoring (CT) – allows separate monitoring of different electrical lines or devices
    Solar power plant (PV) analysis – helps to see generation, consumption and energy balance
    Control via Tuya / Smart Life app – convenient data monitoring on your phone from anywhere
    WiFi connection (no additional controller required) – direct network connection without extra equipment
    Data update every 15 s – fast and accurate tracking of energy changes
    Energy analysis and statistics – allows tracking consumption history and optimizing costs
    CT clamps (no wire cutting required) – quick and safe installation without interrupting the circuit
    High load monitoring up to 200A – suitable for both residential and industrial use
    IoT integration – can be used in smart systems and automation

    Usage

    For home users: Monitor household electricity consumption, analyze solar production and usage, identify “energy consumers” (boilers, heating, EV charging), reduce electricity costs
    For engineers / energy specialists: Energy audits and analysis, phase load balancing, system optimization, integration into IoT or BMS systems
    For electricians: Quick installation using CT clamps, no need to disassemble wiring, ideal for offering smart monitoring solutions, used for panel modernization
    For solar systems (PV): Monitor generation vs consumption, analyze energy flow, optimize self-consumption

    Practical application

    For homes – monitor electricity consumption, identify energy-consuming devices, optimize costs.
    For solar systems – see generation vs consumption, use energy more efficiently.
    In industry – analyze equipment loads, balance phases, optimize processes.
    For electricians – fast CT installation, simple panel upgrade solution.
    In commercial facilities – monitor energy usage of different zones or devices.

    Advantages

    3-phase + multi-channel monitoring in one device
    WiFi connection (no additional controllers needed)
    CT clamps – easy installation
    Perfect for solar systems
    Real-time data (every 15 s)
    App control (Tuya / Smart Life)
    Wide application (from home to industry)

    Disadvantages

    Requires stable WiFi connection
    Monitoring only (no certified metering, e.g., MID)
    CT must be installed correctly (direction is important)
    More complex initial configuration for inexperienced users

    Can it be used without WiFi?
    No, WiFi connection is required for full functionality.

    Can multiple devices be monitored separately?
    Yes, supports up to 16 separate circuits (with additional CT).

    How often is data updated?
    Every ~15 seconds in real time.

    Is this device suitable for solar power systems?
    Yes, it is ideal for monitoring both production and consumption. 

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Wind direction sensor | 0–360°, 16 directions of 22.5° | 12–24 V DC | RS485 Modbus RTU | for D105 pulse analyzer | smart-MAIC | T5W
    Code: T5W

    The T5W wind vane sensor detects wind direction in 16 sectors of 22.5° (value 0–15, 0 = north). It connects to the RS485 input of the smart-MAIC D105 via Modbus RTU. 12–24 V DC supply is not included.

    Price 174.05 € VAT incl.
    ( 143.84 € VAT excl. )
    pH level sensor | pH 0…14 | 5 V DC | 80 cm cable | analog input | for D105 pulse analyzer | smart-MAIC | pH Level
    Code: pH Level

    Submersible pH sensor for measuring water acidity in pools, aquariums and water treatment systems. It connects to the analog input of the smart-MAIC D105 and is powered from its 5 V terminal. Range pH 0…14, accuracy 0.2 pH.

    Price 57.89 € VAT incl.
    ( 47.84 € VAT excl. )
    TDS (dissolved solids) sensor | 0…1000 ppm | 0…2.3 V | 5 V DC | analog input | for D105 pulse analyzer | smart-MAIC | TDS Level
    Code: TDS Level

    TDS sensor for measuring dissolved salt concentration and assessing water hardness. It connects to the analog input of the smart-MAIC D105 and is powered from its 5 V terminal. It helps you see in time when filter cartridges need replacing.

    Price 52.27 € VAT incl.
    ( 43.20 € VAT excl. )
    CYKY-L 5G10 | 5×10 mm² | Copper power cable | 450/750 V | black | 1 m | Lietkabelis
    Code: 91951013

    CYKY-L 5G10 (5×10 mm²) – 450/750 V copper power cable for three-phase 400 V circuits with neutral. Solid cores, PVC insulation and sheath, suitable indoors, outdoors and in the ground. AB Lietkabelis, price per 1 m.

    Price 8.67 € VAT incl.
    ( 7.17 € VAT excl. )
    Water flow sensor | up to 30 l/min | ~450 pulses/l | G1/2" (DN15) | 5 V DC | pulse input | for D105 pulse analyzer | smart-MAIC | DN15(G1/2")
    Code: DN15(G1/2")

    A turbine water flow sensor with G1/2" (DN15) connections for flows up to 30 l/min. It connects to a pulse input of the smart-MAIC D105 and gives about 450 pulses per litre. No separate supply is needed – the D105 provides 5 V.

    Price 38.53 € VAT incl.
    ( 31.84 € VAT excl. )
  • privacy policy

    Information