Three-phase power quality analyzer with 2000A current clamps | 4 voltage + 4 current channels | 0–900V | 10" LCD | harmonics up to the 64th order
Code: ES-PQA2000-10Electrical power quality analyzer designed for accurate measurement of voltage, current, frequency, phase angle, power, and power factor in three-phase and single-phase electrical networks. The device enables detailed analysis of harmonics (2nd–64th order), imbalance, flicker, and other power quality parameters. With 4 voltage and 4 current measurement channels and high accuracy, the instrument is ideally suited for analysis in energy, industrial, and utility networks.
-
Technical Specifications
Measurement channels: 4 voltage channels + 4 current channels
Voltage: 0–900 V
Current: Large clamps (125×50 mm): 40–400–2000APhase angle: 0.000–359.999°
Frequency: 42.5–69 HzResolution:
Voltage: 0.001 V
Current: 0.0001 A
Phase angle: 0.001°
Power: 0.01 W / 0.01 Var
Frequency: 0.0001 HzAccuracy:
Voltage RMS: ≤ 0.1 %
Current RMS: ≤ 0.3 %
Phase angle: ≤ 0.1°
Power: ≤ 0.5 %
Frequency: ≤ 0.01 HzHarmonics: 2–64 order
Voltage unbalance: ≤ 0.2 %
Current unbalance: ≤ 0.5 %
Long-term flicker measurement: 10 min
Display: 10" color LCD (1280 × 800)
Power supply: AC 220V ±15% (45–65 Hz)
Battery operating time: ≥ 8 hours
Power consumption: < 4 VA
Temperature: −10 °C ~ +50 °C
Humidity: 0–90 % RH (non-condensing)
Dimensions: 280 × 210 × 58 mm
Weight: 2 kgFunctions
Real-time voltage and current analysis – full three-phase system diagnostics
Active, reactive and apparent power measurement – for load efficiency evaluation
Power factor (cosφ) analysis – for reducing energy losses
Harmonic analysis up to the 64th order – for network distortion detection
Unbalance measurement – for phase load distribution control
Flicker analysis – for voltage fluctuation assessment
High-resolution 10" display – convenient graphical on-site analysisApplication
For engineer / energy specialist: Electrical quality audits, network harmonic analysis, power factor optimization
For industrial and commercial facilities: Production line and substation monitoring, transformer load analysis, energy consumption reduction
For electrician: Fault diagnostics, load testing, equipment commissioningAdvantages
4 voltage + 4 current channels
Harmonics up to the 64th order
High accuracy
10" high-resolution display
Portable (8-hour battery)
Suitable for professional auditsDisadvantages
Requires professional knowledge to fully utilize functionality
No IP protection class (intended for indoor use)
2 kg weight – not a pocket deviceIllustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
TDS (dissolved solids) sensor | 0…1000 ppm | 0…2.3 V | 5 V DC | analog input | for D105 pulse analyzer | smart-MAIC | TDS LevelCode: TDS LevelPrice 52.27 € VAT incl.( 43.20 € VAT excl. )Water flow sensor | up to 30 l/min | ~450 pulses/l | G1/2" (DN15) | 5 V DC | pulse input | for D105 pulse analyzer | smart-MAIC | DN15(G1/2")Code: DN15(G1/2")Price 38.53 € VAT incl.( 31.84 € VAT excl. )Price 174.05 € VAT incl.( 143.84 € VAT excl. )Price 9.32 € VAT incl.( 7.70 € VAT excl. )pH level sensor | pH 0…14 | 5 V DC | 80 cm cable | analog input | for D105 pulse analyzer | smart-MAIC | pH LevelCode: pH LevelPrice 57.89 € VAT incl.( 47.84 € VAT excl. )






















